Gearing Up

I have been making gears.

 

The big bronze gears on the bottom row were cast, had M1 teeth cut, had the teeth machined off, a bronze ring silver soldered on, and M1.25 teeth cut, which is what you see. They are almost finished. Above them are an almost finished M1.25 pinion and a pinion which will be parted from the stock bronze shaft tomorrow.

The right hand smaller gears are M1, with teeth cut. The right hand one started life like the ones on the left, but was a reject. I machined off the outer ring, and part of the spokes. and silver soldered on a new outer ring, and machined the M1 teeth. The similar solid gear has been made from bar stock from scratch. The spokes will be CNC machined, maybe tomorrow.

The bar at top has M1 teeth machined, ready to be bored for the shaft, and gears parted off.

The pinions for the big gears have a 4 tooth ratchet. This will allow the gear train for carriage movements to be disconnected for firing.