Fitting the Ring Bronze/brass to wood

This rope eye is 17mm high, 18mm long, 2mm thick.

After milling the rebates in the wood, I attached the bracket with the brass screws, and sanded them flat with the surfaces. Most of the strain will be on the steel screws. The brass screws are screwed and Loctited into place.

Then drilled and tapped the wood for the BA10 stainless steel bolts. It is fairly close to the original fastening method.

It took 4+ hours.

A short post. Tomorrow I am visiting the Flagstaff Hill Museum at Warrnambool, 2.5 hrs each way, to get some final details about the wooden recoil brake, the “compressor”. There is a problem with my CAD drawing of the compressor, and I am hoping that close inspection and measurements will answer my query. I will be accompanied by my expert friend Stuart for some extra perspective. The compressor will be the final substantial component to make for this model.