johnsmachines

machines which I have made, am making, or intend to make, and some other stuff. If you find this site interesting, please leave a comment. I read every comment and respond to most. n.b. There is a list of my first 800 posts in my post of 17 June 2021, titled "800 Posts"

Category: GSMEE

Royal Geelong Show 2019

The “Show” was held over the last 4 days.  I will not bang on again about my republican leanings.  See posts from previous years if that persuasion is of any interest.  The weather was ordinary.  Quite a few showers and blustery wind.  But we were mostly warm in the Vintage Machinery shed where our Model Machinery cage is located.  Fairly good visitor numbers, but not much real interest in our model engine offerings.

I exhibited my beam engine and Trevithick dredger engines, both running on piped steam.  The vertical boiler and feed pump was on static display, of no interest to anyone.  My Stirling engine got the most attention from kids, who are attracted by the swirling spiral colours, and not much interest in the intriguing method of running.  I am convinced that models must be moving, colourful, and have some relation to what people and kids see on television if they are to have any traction with the public.

But, the model and full size engine exhibitors enjoyed the displays, and an occasional visitor engaged in conversation.  Here are some pics and videos of some of the shed displays.  There dog shows, bird breeding, monster trucks,  horse riding events, cattle and sheep judging, and side show rides but these were not recorded by me.   I did visit the Amateur Astronomy display, and will visit the workshop of one of the exhibitors soon.

50 yrs vintage machinery.JPG

Beam with lagging.JPG

I had applied wooden lagging to the beam engine cylinder

Package boiler and Trevor.JPG

Steam for the engines is provided from this Package Boiler at 25psi.   Enough to turn them over.  Capable of much higher pressures.

Package boiler diag

cage bench north

Cage Bench North includes the Trevithick dredger model, the beam engine and the Stirling engine.

Cage bench south

Cage Bench South.  Swen Pettig’s prize winning flame gulper, and 1″ Minnie under construction.

Stuart swen

Stuart and Swen ?discussing engine repairs.

P1033007.JPG

Model Engineering first prize!

triple.JPG

And the full size triple expansion engine.  The Vintage Machinery boiler is being upgraded, so there was insufficient steam to run the triple.

 

 

Steam Driven Water Pump for Vertical Boiler

Unfortunately I did not make this pump.  It was made by Stuart Tankard.  I have the castings and plans, and intend to make one for my 6″ vertical boiler but I have too much on the go at present and will finish the vertical boiler and the Trevithick engine first.

Enjoy the pics.  Stuart sets the machining standard for the rest of us to aspire to.

IMG_6663.JPG

IMG_6664.JPG

IMG_6665.JPGIMG_6666.JPG

IMG_6667.JPG

IMG_6668.JPGIMG_6669.JPG

We did not see it running today, but it does work.

It is a 6” Duplex pump from Southworth Engines.

MODEL ENGINES in the cage at the GEELONG SHOW

The following short videos show some of the engines on display by GSMEE in the Vintage Machinery Shed at the recent Geelong Show.  GSMEE is Geelong Society of Model and Experimental Engineers.  All engines are running on steam, except of course the Stirling engine,  the Farmboy, and the Atkinson engine.

These engines will be running again at the GSMEE exhibition 25-26 Nov 2017, at The Lifestyle Pavillion, The Geelong Showgrounds.  Several scale model traction engines, trade exhibits, outside entries, and the engines in the Vintage Machinery Shed will also be on show.  The Hatherly Challenge competition will be judged.  This year the challenge is to make a reversing horizontal mill engine.  Entry is free (gold coin donation accepted with gratitude).

Stirling Engine, running on heat from exhausted steam,  spinning a CD with spiral image, made by John V.

 

 

Stuart Victoria Twin, made by Malcom W

 

 

Bolton12 Beam Engine made by John V

 

 

Farmboy internal combustion engine, running on propane, made by Stuart T

 

Error
This video doesn’t exist

 

Horizontal Mill Engine running on steam, reconditioned by John V,  (GSMEE exhibit)

 

 

Atkinson Engine, running on petrol, made by Rudi V.  FIRST PRIZE.

 

Error
This video doesn’t exist

 

Stuart 5, running on steam.  Reconditioned by Rudi V.  GSMEE exhibit.

 

Error
This video doesn’t exist

 

Beam Engine “Mary”, completed by Stuart T.  THIRD PRIZE.

 

 

Mill Engine, running on steam GSMEE exhibit.

 

Error
This video doesn’t exist

 

Mill Engine running on steam.  GSMEE exhibit.

 

Error
This video doesn’t exist

 

Mill Engine, running on steam, made by Malcolm W.

 

Error
This video doesn’t exist

 

Triple expansion marine steam engine by John V.  Almost completed.  SECOND PRIZE.

IMG_5659

Metalworking for a cabinet maker

Our model engineering club has been locked out of our club rooms because MOULD has been detected in the building.   Apparently a lengthy process to reduce the mould to acceptable levels.  (note to self…. make sure that the inspectors never set foot in our house).

So our meetings have been held in various locations, including a sports centre and a basketball building.   I feel quite virtuous when I enter these buildings, but for some reason I do not feel any fitter when I exit.

A recent day meeting was held at my farm workshop.  Not my farm anymore, just the buildings.

walls-of-constantinople

Not that one….   the other one.

And one of our more senior members requested a display of CNC machining, from design to product.

So, I drew up a finial which was required to complete a bookcase which I had built 30 years ago.  Then imported the DXF drawing file into “Ezilathe”.

Ezilathe on screen.JPG

Showing Stuart Tankard, the author of Ezilathe, scrutinizing my drawing ….  and offering excellent suggestions for improvement using Ezilathe.

Then used Ezilathe to generate the G codes…..

Then to the CNC lathe…..

turning the finial.JPG

CNC turning the finial in 51mm brass rod.  1600rpm, 100mm/min.  Controlled by Mach 3 Turn.  I removed the tailstock shortly after this photo was taken, to permit completion of the ball.

GSMEE CNC close.JPG

Some GSMEE members watching the CNC turning.  I spent 3 days clearing up the workshop so the 16 members could fit in.   Amazing how much space was revealed in the workshop.   This is the Taiwanese lathe which I converted to CNC.  See old posts for details of the conversion.

I watched anxiously as the part was gradually revealed.  Admittedly, I had had a test run in wood to check the parameters, but this was the first run in metal.

finial in hand.JPG

The finial.  The bar stock was parted later.

finial on bookcase

Bookcase finally finished, after 30 years.

If you are interested in CNC lathe work, you should take a look at “Ezilathe”.  It is superb.

If you are on Facebook, (of course you are if you are reading this), you might like to take a look at the GSMEE Facebook site.