machines which I have made, am making, or intend to make, and some other stuff. If you find this site interesting, please leave a comment. I read every comment and respond to most. n.b. There is a list of my first 800 posts in my post of 17 June 2021, titled "800 Posts"
Trevithick Dredger Engine Guide Bars and Crosshead
by John
As you can see from the photo, I have made the vertical guides, the curved top bar and the crosshead.
The curved bar was bent in the motorised ring roller which I made years ago. Bending 3.2mm steel was easy. I have bent steel bar up to 10mm thick in this machine.
Parts of the guide bar. 2mm thick. I confess that these were CNC’d.
A few more parts required for the crosshead, but a test fit was quite good. It is just pushed together at this stage.
Confession is always good for the soul
LikeLike
It was a fake confession. If I can CNC it, I do. I also use electricity. And any technology I can get my hands on.
LikeLike