Armstrong RML. The Chassis -1
I will start by making the main girders. At 1:10 scale they will be 400mm long, 11mm wide and 46mm deep. Some fabrication will be required.
Many rivets required. I will need to improve my riveting skills. One issue to be decided. Do I use copper (easy) or steel rivets (authentic)?. Whichever, they will be eventually painted the same colour as the girders.
And another decision. Your opinions invited. 2 methods for fabricating the girders.
TIG weld the flanges top and bottom (right). Or, (left) join 2 pieces of angle iron, then TIG weld the bottom flange. I don’t like the top groove to be filled. I do not really want to paint the surface that the carriage wheels roll along.
It is a very long time since I did any TIGging, so maybe some practice runs first…
And another option comes to mind…. just to machine the shapes out of solid bar. I think that I will try TIG first.
Later…. just remembered. I don’t have any TIG gas. Easter. Bum. OK. Back to square one. Maybe I will try to mill the shape from bar…..