Boxford TCL125 CNC Lathe, 3rd AXIS.
by John
Below is a video which was recorded by my machining mentor friend, Stuart Tankard. Stuart made a milling attachment for his Boxford CNC lathe, and he demonstrates it in the following video by making some lovely small valve control handles.
I followed in Stuart’s footsteps by making a similar attachment for my identical Boxford 125 CNC lathe, but I have not yet video’d it in action. Not much point when Stuart’s video is so good. I really like the absence of irrelevant, irritating music. Just machining sounds. Enjoy. (if you want to see it full screen, copy the YouTube address from the settings icon).
johnsmachines 
This is s such a great Mod John, but how the hell do you get the Servo spindle motor to switch from speed to position?! I thought about putting in a physical switch to the servo drive , but how have you done it?
LikeLike
Hi osrixmods, the spindle motor is an AC Servo which I purchased from Fastobuy2017 on ebay. The motor manual lists how to switch from speed to position, but from memory one of the inputs is open for speed and closed for position, or vice versa. Mach3 codes M111 and M112 then select speed or position. There is a 12v, 2 contact relay to install. If you need more information than this I can put you into contact with Stuart Tankard, who developed the mod. John
LikeLike
.great video John. And nice handwheels to.
LikeLike